Prosody compact PCI installation guide
14
The control software supplied to run on the card (downloaded to on-card RAM) has been tested
for compliance with the requirements of the Approval Authority referred to in the appendices
following
Country Specific Information
for connection to the digital network. With a RAM-based card,
the Approval label on the card is only valid and applicable if the card is used with the Aculab
supplied signalling software appropriate for the Approval label.
Use of any other control software on a port connected to the PSTN is not covered by the
Approval and reference must be made to the Approvals Authority before any connection to the
network is made.
3.13 User
Responsibilities
There may be configurations of the Prosody cPCI card along with other equipment that may re-
quire additional approval testing by an accredited test laboratory.
In particular, in producing the approval certificate for the card, the Approval Authority did not
place any specific restriction on the use of the card apart from any restrictions listed in the
appendices following
Country Specific Information
.
It is the responsibility of the user to ensure that all of the legal requirements for attachment are
met. The user is advised to seek competent advice regarding any particular equipment
configuration or use.
3.14 Speech
Calls
If the Prosody cPCI card is used in an application that makes or answers calls with a service
code that indicates a speech or telephony call, or any call that may use a partly analogue route,
the Approval Authority may place requirements on the audio signals transmitted. Please refer to
the appendices following
Country Specific Information
for more details.
Many of the speech and FAX resource cards that may be used with the Prosody cPCI card may
comply with Approval Authority requirements, but it is the responsibility of the user to ensure
that Approval requirements are complied with by confirmation via the manufacturer of the card,
or by any other suitable means such as independent testing.
Signal sources that do not guarantee compliance with Approval requirements must be
conditioned by appropriate circuitry before transmission.
