6
Troubleshooting
Clock won’t turn on
or displays partial
numbers
• Reset the unit by pressing the reset button located on the
back of the clock. This will reset the alarm to the original
factory settings. Time and date will need to be entered
after a reset.
Blinking Colon (dots)
• Blinking of the dots is a way that the seconds are
counted. There is no way to stop the dots from blinking.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
Care & Maintenance
Clock Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
CR2032
3V
+
Replace Intelli-Time Clock Battery
Intelli-Time technology is powered
by a pre-installed coin-cell battery
that stores the time and date
settings. The battery has a shelf life
of several years. Time and date will
need to be entered after replacing
the Intelli-Time battery. To replace
the Intelli-Time battery:
1. Locate the coin cell battery
compartment door on the back of
the clock. Unscrew and remove
the compartment cover.
2. Insert 1 x CR2032 coin
cell battery into the battery
compartment, as shown. Install
battery with “+” positive terminal
facing OUT.
3. Screw in the battery cover.
