background image

DISPLAY UNIT FRONT 

1.  Current Outdoor Temperature 
2.  Outdoor Low Temperature Record 

Lowest temperature recorded since 

midnight. 

3.  Outdoor High Temperature Record 

Highest temperature recorded since 

midnight. 

4.  12 to 24 Hour Weather Forecast 

Self-Calibrating Forecasting pulls data 

from the outdoor sensor to generate 

your personal forecast. 

5.  Learning Mode Icon 

Disappears after weather forecast 

self-calibration is complete.

 

6.  Intelli-Time

®

 Clock 

Automatically updates for 

Daylight Saving Time.

 

7.  Time Zone 
8.  Current Indoor Temperature 
9.  “  “ Arrow 

for setup preferences. 

10. Humidity Level Icon 

Indicates a high, low or ideal

 

indoor humidity level.

 

11.  “  “ Button 

for setup preferences. 

12. Display Unit Low Battery Indicator 
13. “  “ Arrow 

for setup preferences. 

14. Current Indoor Humidity 
15. Date 
16. Day of the Week 
17.  Pressure History Chart 

Displays the past 12 hours of data for 

barometric pressure.

 

18. Current Baromteric Pressure 

FALLING, STEADY or RISING 

indicates the direction pressure is  

trending. 

19. Outdoor Low Humidity Record 

Lowest humidity recorded since 

midnight. 

20. Outdoor High Humidity Record 

Highest humidity recorded since 

midnight. 

21. Current Outdoor Humidity 
22. Historical Barometric Pressure 

Pressure reading 12 hours ago. 

23. Outdoor Sensor Signal Strength 
24. Sensor Low Battery Indicator 
25. Momentary Backlight Button 

Lights display for 7 seconds (only 

applicable while on battery power).

 

DISPLAY UNIT BACK 

26. Integrated Hang Hole 

for easy wall mounting.

 

27. Reset 

Full reset to factory defaults.

 

28.  A-B-C  Switch 

ID code

 

that must match 5-in-1sensor’s 

A-B-C switch to ensure units 

synchronize.

 

29. Battery Compartment 
30.  “LIGHT”  Switch 

Controls the display’s backlight and 

brightness: Off, Low, Medium, High

 

31. Plugin for Power Adapter 
32. Battery Compartment Cover 

Содержание 2008

















Отзывы: