background image

Call Free 1.800.848.1633 • Fax Free 1.800.447.2923

 Web: GoHCL.com • Email: [email protected]

INSTRUCTIONS FOR

 

Wireless Refrigerator Freezer Thermometer (#10378)

© Health Care Logistics, Inc. 2015

4

SETUP

Install or Replace Batteries

AcuRite recommends high quality alkaline batteries for the best product 

performance. Heavy duty or rechargeable batteries are not recommended.
The freezer sensor requires lithium batteries for low temperature conditions. 

Cold temperatures can cause alkaline batteries to function improperly. Use 

lithium batteries in the freezer sensor for temperatures below -4ºF / -20ºC.

Select Degrees Fahrenheit or Celsius

To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units, 

slide the “ºC/ºF” switch, located on the back of the thermometer display.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE 

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to 

be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of 

used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries 

in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT 

recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Thermometer Display

1.  Lift up the battery door and slide off

the battery compartment cover. 

2.  Insert 2 x AAA batteries into the

battery compartment. Follow the

polarity (+/-) diagram in the battery

compartment.

3.  Replace the battery cover.

Sensors

1.  Slide off the battery compartment

covers, located on the front of the 

units. 

2.  Insert 2 x AA batteries into the

battery compartment. Follow the

polarity (+/-) diagram in the battery

compartment.

3.  Replace the battery cover.

-40ºF 

(-40ºC)            

   

(70°C)

 158°F   

  

-4ºF 

(-20ºC)

  (70°C)

 158°F

Содержание 10378









Отзывы: