ACU-RITE 06087, Инструкция по эксплуатации

Страница: 13 / 16

13
Specifications
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
DISPLAY’S BUILT-IN
TEMPERATURE
SENSOR RANGE
32
º
F to 122
º
F; 0
º
C to 50
º
C
DISPLAY’S BUILT-IN
HUMIDITY SENSOR
RANGE
1% to 99%
OPERATING FREQUENCY
433 MHz
POWER
5V power adapter
3 x AAA alkaline batteries (optional)
DATA REPORTING
Display: Indoor temperature & humidity: 60 second updates
DATA REPORTING
Wind Speed: 18 second updates
Outdoor temperature & humidity: 36 second updates
Indoor temperature & humidity: 60 second updates
WIFI 802.11.b/g/n
Weather Underground
TM
connectivity requires an active
2.4 GHz broadband internet connection and an active
Weather Underground
TM
account.
Care & Maintenance
Display Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away
from dust,
dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.