Select Measurement Units
To select between standard units (mph, ºF, etc.) or
metric units (kph, ºC, etc.):
1. Press the “
▲
” or “
▼
” buttons until “SET UNITS?”
is displayed on the Selectable Category part of
the display unit.
2. Press the “SET” button to set the unit preference.
3. Press the “
▲
” or “
▼
” to select “STAND” for
standard or “METRIC” for metric units.
4. Press the “SET” button to confirm your selection.
5. Next, you will see “WIND MPH”. Press the “
▲
”
or “
▼
” to select MPH, KPH, or KNOTS for wind
speed units.
6. Press the “SET” button to confirm your selection.
Units are now set.
Placement for Maximum Accuracy
Display Unit Placement
Place the display unit in a dry area free of dirt and dust. To ensure
accurate temperature measurement, place out of direct sunlight and
away from heat sources or vents. Display unit stands upright for
tabletop use or is wall-mountable
Important Placement Guidelines
Display unit and sensor must be within 330 feet (100 m) of each other.
MAXIMIZE WIRELESS RANGE
Place units away from large metallic items, thick walls, metal surfaces, or other
objects that may limit wireless communication.
PREVENT WIRELESS INTERFERENCE
Place both units at least 3 feet (.9 m) away from electronic devices (TV,
computer, microwave, radio, etc.).
6