manualshive.com logo in svg

ACU-RITE 01536, Инструкция по эксплуатации

Поделиться
Скачать
ACU-RITE 01536 Скачать руководство пользователя страница 19

19

Problem

Possible Solution

Cannot access data

online or on the 

AcuRite mobile app

• Verify under Status that data was received from the 

indoor display. The timestamp should update every 

18-36 seconds.

• Verify that you created an account or logged into an 

existing account at www.MyAcuRite.com or in the 

AcuRite app, and that you input the display’s  

DEVICE ID as a part of the account setup.

• Verify the PC that the display is connected to is 

always powered ON.

• Verify the PC that the display is connected to is 

always connected to the internet.

• Verify that the display’s DEVICE ID is entered 

correctly in the PC Connect software on your PC.

• Verify that “Sharing” is enabled in the PC Connect 

software on your PC.

• Verify that the display’s DEVICE ID is correct in your 

www.MyAcuRite.com and/or AcuRite mobile app account.

• Follow on-screen troubleshooting steps in the PC 

Connect software.

No data received from 

indoor display

• Verify that the USB cable is securely connected to the

    display AND to the PC.
• Verify the display is powered ON.
• Restart the PC Connect software.
• Unplug the USB cable from the PC for 1 minute,

   then plug the cable back in again.

• USB port may be malfunctioning, try using a different

    USB port.

Add-on Sensor  

not recognized

If the display is being used with add-on Temperature & 

Humidity Sensors (models 06002 or 06044), the A-B-C 

channels must differ between each add-on sensor. 

1. Bring the display and wireless sensors together and 

 position them side-by-side.

2. Unplug cord & remove the batteries from the display.
3. Verify that each sensor has a different A-B-C 

channel selected.

•  Model 06002 - Locate the A-B-C switch inside the 

battery compartment to adjust channel setting.

•  Model 06044 - Locate the A-B-C button on the back 

of the sensor to adjust channel setting (indicated on 

sensor display).

4. Re-install sensor batteries (if applicable).
5.  Plug in & re-install display batteries.

 

NOTE:

 It may take a few minutes for the display and 

sensor(s) to synchronized after batteries are replaced.

Troubleshooting

Содержание 01536

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды