SETUP
Install or Replace Batteries
AcuRite recommends high quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.
SQUEEZE
SQUEEZE
LARGE
TABS
SQUEEZE
LARGE
TABS
SQUEEZE
SQUEEZE
LARGE
TABS
SQUEEZE
LARGE
TABS
1
SQUEEZE
LARGE
TABS
SQUEEZE
LARGE
TABS
SQUEEZE
SQUEEZE
LARGE
TABS
SQUEEZE
LARGE
TABS
2
SQUEEZE
SQUEEZE
LARGE
TABS
SQUEEZE
LARGE
TABS
3
4
Rain Collector
1. Separate rain collector cover from the base by gently
squeezing tabs and pulling the cover upwards.
2. Remove battery box by squeezing the two tabs on
each end together.
3. Remove and discard cardboard rain gauge stabilizer.
4. Insert 2 x AA batteries into the battery compartment
as shown. Follow the polarity (+/-) diagram in the
battery compartment.
5. Securely place the battery box back into the rain
collector base.
6. Securely re-attach the rain collector cover onto rain
5
SQUEEZE
SQUEEZE
LARGE
TABS
SQUEEZE
LARGE
TABS
6
collector base.
Display Unit
1. Slide off the battery
compartment cover.
2. Insert 3 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
5