manualshive.com logo in svg

ActSafe PMX, Руководство пользователя

Поделиться
Скачать
ActSafe PMX Скачать руководство пользователя страница 28

D.05

  

EQUIPMENT, MATERIAL

AND TOOL LIFTING

The PMX Ascender is, in combination with the ActSafe 

Equipment Lifting Rope (ELR), approved under the 

Machinery Directive as an equipment lifting system 

provided that all other equipment used also meets lifting 

requirements. The lifting system must be connected to 

an appropriate anchor that meets requirements for load 

lifting anchors (a competent person shall judge if the 

anchor is sufficient and safe to use).  

RECOMMENDATION

Lifting operations are ideally performed with a  

three person team. A lifting supervisor, a slinger 

for attaching loads and an Ascender Operator. 

 i

Note

The supplied ActSafe karabiner may be replaced  

with any 

EN13889 

shackle with a minimum WLL of  

0.5 t. All other parts of the Ascender should only be 

replaced with original ActSafe parts by an ActSafe-

approved service engineer.

AS198 Actsafe PMX Manual Eng 2 20190319.indd   28

19/03/2019   19:09

Содержание PMX







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды