Page 6
2. Function Buttons
Remote Control
Overview
8. LED
Activate or Disable the indoor unit Display. Press this
button to hide the indoor unit display, press it again to
illuminate the display.
9. CLOCK
Use to set the time Clock.
NOTE:
Press the CLOCK button and TURBO button
together to lock or unlock the keyboard.
10. SLEEP/QUIET
Activate or Disable sleep function. Adjusts and main-
tains the temperature while you sleep and can save
energy. This function is not available on DRY mode.
For more detail on this function please refer to “Sleep
Operation” in your OWNER’S MANUAL.
Hold the button more than 2 seconds to Activate or
Disable QUIET mode. When QUIET mode is initiated,
the indoor fan speed will reduce to minimum air flow
providing a whisper quiet noise.
NOTE:
：The unit will disable SLEEP mode if MODE, FAN
or ON/OFF button are pressed.
11. SWING
Used to stop or start vertical louvre movement and
set the desired up/down air flow direction. The vertical
louvre changes 6 degrees in angle for each press.
Hold the button for more than 2 seconds to activate the
auto vertical swing feature.
12. SWING
Used to stop or start horizontal louvre movement and
set the desired left/right air flow direction. The horizontal
louvre changes 6 degrees in angle for each press.
Hold the button for more than 2 seconds to activate the
auto horizontal swing feature.
13. FOLLOW ME/SELF CLEAN
Press this button to Activate or Disable FOLLOW ME
function. When this function is activated, the remote
control will sense and display the temperature
at its location. The remote control will then send this
signal to the air conditioner and continue to do so
every 3 minutes. Press the Follow Me button again
to disable this function. The air conditioner will
cancel the Follow Me function automatically if it
doesn’t receive the signal for a period of 7 minutes.
Hold the button more than 2 seconds to Activate or
Disable SELF CLEAN function. Under SELF CLEAN
function, the air conditioner will automatically clean
and dry the Evaporator and keep it fresh for the next
operation. During this operation the indoor screen will
display “SC”.
14.
TURBO
Press this button to Activate or Disable TURBO function.
Turbo function enables the unit to reach the preset
temperature during cooling or heating operation faster.
NOTE
This remote controller is Universal and can be used with
many different systems. All the functions described are
accomplished by the system, if the system does not have
the feature pressing the button on the remote controller
will have no corresponding operation.
