Page 4
1. Safety Precautions
Multi Split System
INTRODUCTION
• CONGRATULATIONS on your purchase of an ActronAir air conditioning unit! This unit has been designed and engineered
to provide optimum air conditioning and to achieve maximum energy efficiency.
• Your air conditioning system has been manufactured from the highest quality materials. Numerous “in house” and
“external” inspections and test procedures were conducted to your air conditioning to ensure satisfactory operation.
INFORMATION ABOUT THIS GUIDE
• This guide provides operation instructions specific to your split indoor unit. Read this manual thoroughly to ensure safe
operation of your air conditioning system.
PRODUCT INSPECTIONS
• Fully check your air conditioning unit and all items against the bill of loading upon receiving your shipment. Inspect the
unit, components and accessories for any sign of shipping damage. If there is any damage to the unit, contact ActronAir
Customer Care immediately on: 1300 522 722.
• Check the unit nameplate to verify the model, serial number, electrical rated specifications and details are correct.
CODES, REGULATIONS AND STANDARDS
• The installer assumes responsibility to ensure that unit installation complies with the relevant council, state & federal
codes, regulations and building code standards. All electrical wiring must be in accordance with current electrical authority
regulations and all wiring connections to be as per electrical diagram provided with the unit.
SAFETY INSTRUCTIONS
1. Only qualified HVAC technicians* should install and service this air conditioning equipment. Improper service or alteration
by unqualified technician could result in significant and major damage to the product or property which may render your
warranty null and void. Such unqualified service could also lead to severe physical injury or death. Follow all safety
instructions in this literature and all warning labels that are attached to the equipment.
2. Prevailing WH&S regulations must be observed and will take precedence to the safety instructions contained in this manual.
Safe work practices and environment must be of paramount importance in the performance of all service procedures.
3. Ensure that unit installation complies with relevant council regulations and building code standards.
4. All electrical wiring must be in accordance with current electrical authority regulations and all wiring connections to be as
per electrical diagram provided.
5. Secure the fans against accidental contact. Beware of pinch point and sharp edges which can cause cutting injury.
6. Always wear appropriate PPE, remove any dangling jewellery and protect long hair by wearing a cap.
7. Make sure that safety guards and panel covers are always firmly secured and not damaged.
8. This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by
a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that
they do not play with the appliance.
9. Installer must incorporate a means of electrical disconnection (isolator) in the sub mains fixed wiring in accordance with
the Australian wiring rule (AS3000).
10. Secure the power cords and control cables that goes in/out the unit. Use the cable ties provided in the control box.
* Qualifications required will be appropriate Electrical, Refrigeration and Refrigerant Handling License & Training, dependent on local State/Territory regulations.
Содержание MULTIELITE MRC-052AS-2
Страница 2: ......
