Operation Manual - LR7 Wall Control
Document: 0525-075
Ver. 2 190912
Operation Manual
LR7 Wall Controller
9
08. Turning Air Conditioner On/Off
NOTE
The air conditioning system will re-start on your last settings and operating mode e.g. 22
o
C set temperature, AUTO mode,
HIGH fan speed.
The display will show the Set Temperature, Fan Speed, Fan Mode and Mode of Operation.
08.01. Turn On and Off the Air Conditioner
1. Press the
button once to turn On and Press the
button once again to turn Off.
NOTE
The
button back light will illuminate when unit is turned on.
The
button back light will not be illuminated when unit is turned off.
09. Adjusting Set Temperature
Press either the
or
buttons to either increase or decrease the temperature correspondingly.
NOTE
• For a WARMER room temperature, press
the
button.
• For a COOLER room temperature, press
the
button.
• The Set Temp is adjustable between 16°C and 30°C in 0.5°C increments.
• The Set Temp is adjustable in controller even when the system is Off.
• No Set Temp displayed during Fan-Only Mode.
10. Changing Operating Mode
NOTES
• Available Fan Speed are
LOW
,
MED
,
HIGH
,
LOW CONT
,
MED CONT
and
HIGH CONT
.
• When in Fan-Only Mode
LOW CONT
,
MED CONT
and
HIGH CONT
will not be available.
• When the system is On, the Indoor Fan can run continuously and is indicated by the
CONT
indicator on the LCD. This is
generally preferred during the Cooling Mode to ensure maximum air circulation. When set to
LOW
,
MED
or
HIGH
the
fan will cycle with the compressor operation according to setpoint and room temperatures.
10.01. Fan-Only Operation
1. Press the
button until
FAN
appears on the display.
