Installation Guide
Easyconnect App
13
Installation Guide - Easyconnect App
Document: 9590-4009
Ver. 2 201126
3. Power the Air conditioner off from the
power supply for 15 seconds, then back
on again.
4. Within 8 minutes of power being reset,
press the LED button on the remote
control 7 times - this will initiate access
point mode and allow your phone to
link with the Easyconnect app setup
process.
Ensure the remote control is pointed at
the appropriate receiver:
Cassettes (CRE) – Receiver on the
indoor unit fascia.
Ducted (LRE/BRE) – Remote receiver
PCB connected to the indoor unit
(Port CN10) on unit commissioning.
(Appendix A on Page 19)
If no receiver is located on the indoor
unit it can be purchased as a spare part
LRE13016B .
NOTE
Access Point mode is indicated by the
white LED on the smart port flashing.