Actron OBD II AutoScanner CP9175, Инструкция по эксплуатации

Страница: 7 / 66

SF-3
Risk of explosion.
• Wear safety goggles and protective clothing.
- User and bystander
- Even if your everyday glasses have impact
resistant lenses, they may NOT be safety
glasses, and may not provide adequate
protection.
• Do not use Tool in environments where
explosive vapors may collect.
- As in below-ground pits, confined areas, or
areas that are less than 18 inches above
floor.
• Use Tool in locations with mechanical
ventilation providing at least 4 air changes per
hour.
• Flammable fuel and vapors can ignite.
• Do not smoke, strike a match, or cause a spark in
vicinity of battery.
Battery gases can ignite.
• Avoid making accidental connection between
battery terminals.
- Do not place uninsulated metal tools on
battery.
• When removing battery cables, remove ground
cable first.
• Avoid sparks when connecting or disconnecting
power leads to battery.
• Make sure ignition is OFF, headlights and other
accessories are OFF and vehicle doors are
closed before disconnecting battery cables.
- This also helps prevent damage to on-board
computer systems.
• Always disconnect battery ground connections
before servicing electrical system components.
Explosion can cause injury.
!
WARNING