Actron CP9190, Руководство пользователя

Страница: 109 / 238

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 – 5
GM Historic (OBD I) Diagnostics
5
Never operate the tool while driving. Have another
person assist with the operation of the Scan Tool.
✓
This function can be performed with KOEO or KOER.
2.
Confirm selection.
•Press
LEFT
or
RIGHT
to move the brackets to the desired
response.
• Press
ENTER
.
✓
If a recording currently exists in
memory, a message to Erase Old
Recording is displayed. The Scan
Tool stores only one recording at
a time, so be sure to review it
before erasing it.
Multiple Group Vehicles
✓
Some vehicles display a Select Group screen for recording data.
In these cases, only one group of data can be recorded at a time.
Recording another group of data overwrites the present one.
3. Select Trigger Method.
•Use
UP
or
DOWN
arrow
key until desired trigger
method is highlighted.
• Manual Trigger begins
recording when the
ENTER
key is pressed.
• Trigger on Codes begins
recording when a diagnostic
trouble code (DTC) is stored in
the PCM.
•Select a method and press
ENTER
.
✓
If Manual Trigger is selected,
press
ENTER
to begin
recording. Trigger on Codes will
not show this screen.
! WARNING
! WARNING
No
Previous recording
in memory. Do you
want to erase it and
make a new one?
Record Data
<Yes>
Manual Trigger
Trigger on Codes
Select Trig Method
Manual Trigger
Press BACK
to exit.
Ready to record
Press ENTER
to start recording.
Record Data