Actox ABE12KX, Руководство пользователя

Страница: 24 / 36

ABE12KX User Manual
Page 24 of 36
alarm is clear)
Get Summary
Alarm
7E FF 02
00 0F 0D
7F
Query device for
summary alarm
Update summary
alarm:
7E FF 84 00 0F
00 XX ZZ 7F
XX = Alarm state (0 =
no alarm; 1 = alarm).
ZZ = CRC.
1) cmd: 7E FF 02 00 0F 0D 7F
reply: 7E FF 84 00 0F 00 01 8A 7F
(Summary alarm is raised) 2) cmd:
7E FF 02 00 0F 0D 7F reply: 7E FF
84 00 0F 00 00 8B 7F (Summary
alarm is clear)
NOTE:
The packets shown are based on the assumption that the Booster device address is set to 0xF. To modify the
commands for different addresses, the Dest/Src byte and the CRC byte will have to change in all packets.
Command Packet
format Explanation Possible
replies Interpretation Examples
Set Mute
Control
7E FF 14
13 01 00
MM ZZ 7F Mute / Unmute the device.
ACK
NACK
MM = Mute control (1
= Mute; 0 = enable).
ZZ = CRC 1) cmd: 7E FF 14 13 01 00 01 07
7F reply: ACK (Mute device) 2)
cmd: 7E FF 14 13 01 00 00 06 7F
reply: ACK (Enable device)
Set Attenuation
7E FF 14
18 FE AA
AA ZZ 7F Set internal attenuator value
Note: value is internally
rounded with 1dB discrete,
value range is 0-30 dB.
ACK
NACK
AA AA = Attenuation
in 10 x dB. ZZ = CRC. 1) cmd: 7E FF 14 18 FE 00 C8 3A
7F reply: ACK (Set attenuator to
30.0dB = 0d200 = 0x00C8) 2) cmd:
7E FF 14 18 FE 00 69 9B 7F reply:
ACK (Set attenuator to 10 dB =
0d105 = 0x0069)
Set Low Power
Alarm
Threshold
7E FF 14
10 10 TT
TT ZZ 7F Set low power alarm threshold
Note: zero value means low
power alarm disabled
ACK
NACK
TT TT = Low power
threshold in 10 x dBm.
ZZ = CRC. 1) cmd: 7E FF 14 10 10 00 C8 DC
7F reply: ACK (Set threshold to
47.0dB = 0d470 = 0x01AE) 2)
cmd: 7E FF 14 10 10 00 00 14 7F
reply: ACK (Set threshold to 0.0 dB
= 0d00 = 0x0000) – alarm disabled
Set Device
Address
7E FF 14
03 04 00
XX ZZ 7F Set device address Note: (0 ≤
address ≤ 0xE
ACK
NACK
XX = Device address.
ZZ = CRC. 1) cmd: 7E FF 14 03 04 00 0A 19
7F reply: ACK (Set device address
to 0xA) 2) cmd: 7E FF 14 03 04 00
0E 1D 7F reply: ACK (Set device
address to 0xE)
Command Packet format Explanation Possible replies Interpretation Examples
Get L.O.
Frequency
7E FF 02 10 12 ZZ
7F Query device for
L.O. Frequency
Update
L.O.
frequency
7E FF 84 10 12
QQ QQ ZZ 7F
QQ QQ =L.O.
Frequency
In HEX format
ZZ = CRC
1.cmd: 7E FF 02 10 12
ZZ 7F
reply: 7E FF 84 10 12 13 24
ZZ 7F
(Frequency = 0x13 24=0d4900
MHz)
reply: 7E FF 84 10 12 15 7C
ZZ 7F
(Frequency= 0x15 7C =
0d5500 MHz)
Get L.O. 1 or L.O.
2
7E FF 02 10 11 ZZ
7F Query device for
L.O. 1 or L.O. 2. Update L.O.1 or
L.O.2
7E FF 84 10 11 00
LL ZZ 7F LL = 00 = L.O.1
LL = 01 = L.O.2
ZZ = CRC
1.cmd: 7E FF 02 10 11 ZZ 7F
reply: 7E FF 84 10 11 00 00
ZZ 7F
(LL = 00 = L.O.1)
reply: 7E FF 84 10 11 00 01
ZZ 7F
(LL = 01= L.O.2)
Set L.O. 1
Set L.O. 2
7E FF 14 10 11 00 00
ZZ 7F
7E FF 14 10 11 00 01
ZZ 7F Set the frequency
of L.O. 1
Set the frequency
of L.O. 2 ACK
7E FX E0 ZZ 7F X = device address
of the packet
source device
ZZ = CRC
1.Reply 7F FF E0 ZZ 7F
ACK reply sent from the device