Trouble Shooting
If there is no light from the unit, please check the main power supply and fuse.
If unit does not respond to DMX, please check the DMX cables are connected
properly and are wired correctly.
If unit does not response to the music please adjust the sound-active sensitivity level
by Sensitivity Adjustment Knob.
If problems cannot be solved please contact your dealer for service
Fuse Replacement
Always disconnect from main power supply before attempting to replace the fuse
Remove the old fuse from the holder and replace with the exact same type fuse.
Replacement with anything other than the specified part may damage your unit.
Cleaning
Use a soft cloth and normal glass cleaner to clean the outside casing. Cleaning
frequency depends on the environment in which the fixture operates. Be sure to dry
all parts before plugging the unit back in.
Operating Modes
1. Stand-Alone Operation (Sound Active Mode)
Sound Active mode
This unit has built-in program that will react to sound and music under Sound
Active mode. Set all DIP switch pins to OFF to run Sound Active mode
2. DMX Operation
DMX operation gives the users freedom to create their own programs tailored to
their own individual needs.
To run this unit in DMX mode, connect the unit to any standard DMX controller
via XLR connectors.
Please consult DMX controller manual to determine address.
DMX Signal Levels
Channel 1
Channel 2
Channel 3
Laser pattern and effect
controls
Movement speed control.
Channel-2 is functional only
when value at channel-1 is
set between 100 and 189.
Value Effect Value Speed
0-1 OFF
0-42
2-99 49
patterns
43-85
100-189 45
animations
86-128
190-255 Sound
Active
129-171
172-214
215-255
FAST
SLOW
Line effect control. User
can change the patterns
to dot-line patterns by
control this channel.
e.g.
Function Selection Chart
DIP SWITCHES CHART
1
2
3
4
5
6
7
8
9
10
FUNCTION
OFF OFF OFF OFF OFF OFF OFF OFF OFF
SOUND MODE
SET ADDRESS
DMX MODE
