9
OZONE PLATE
Carefully remove the plates (a & b) from the card cage
by grasping the middle of the edge nearest to you and
slowly pulling straight out .
MAINTENANCE
(CONTINUED)
PLATE CARD CAGE
Also be sure to clean the stand-offs at the corners
of the ozone plate card cage . (A cotton swab with
alcohol works well .)
FAN BLADE AND FRONT GRILL
Wipe off fan blade and front grill if dirty with damp
washcloth . The fan requires no maintenance (with
the exception of the first time it is used, when it
may be necessary to give it a gentle push to get it
started) . If the fan squeaks, a drop of lightweight
oil may be needed on the fan shaft .
For all applications - Clean with 50% ammonia and 50%
water to remove contaminates . Put the plate(s) into a
shallow dish and pour enough mixture into the dish to
just cover plate(s) . Allow the plate(s) to soak for 10-20
minutes . Remove and scrub with a soft bristle brush . Rinse
thoroughly . Let air dry for 24 hours or use a blow dryer to
dry thoroughly .
If you are in an environment where there are fats, oils, or grease, such as in a kitchen, start
cleaning with denatured alcohol and a soft bristle brush . This will cut the grease without
leaving a residue .
