5
ADJUST/SETTING CONTROLS
Ionizer Control
The adjustment and setting of the ionizer control for the MI-1500B ranges from full positive to full
negative and is determined by application. The more particulate or pollutant in the air, the higher
the settings need to be. The MI-1500B is capable of creating a static charge on objects. Locate a
setting where the pollutants or particulates are eliminated and still have a non-static situation.
Fan Control
The fan speed is adjustable for the MI-1500B.
Static Control
Static is created by an electrical imbalance between positive and negative ions and can be biased
positively or negatively. Establishment of the stronger polarity can be determined by a trial and
error method; however, the majority of all static problems are positive in nature. This means that
the best starting point for the ionizer setting is at the one o’clock position, which is a slightly
negative position. If the static problem becomes worse, turn the control to the left in small
increments until the problem has been resolved.
If the static problems has been reduced, but not
eliminated, turn the control to the right in small
increments until the problem is resolved.
Smoke, Dust, and Particulate Removal
Airborne contaminates are best removed with
the ionizer control set to the extreme right (full
negative). Depending upon the nature and degree
of the pollution, it may not be necessary to have
the control at full power.
on/off switch
fan
fuse
ionizer
PLACING THE UNIT
Elevate the unit as high as possible to insure complete purification. Some pollutants such as
smoke rise and the unit, when elevated, can more effectively eliminate the pollutant.
The MI-1500B is most effective when placed in a position that allows the ions to be spread evenly
and thoroughly mixed with the polluted air. Suggested location, listed in the order of preference:
1. In or near the air stream or current within the room that will
2. Best disperse the ions
3. Nearest the source of worst pollution
4. In the area most heavily used to achieve maximum benefit
The MI-1500B can create a high level of static electricity in an
unpolluted environment which may cause problems with static
sensitive equipment, such as computers.
WARNING:
