ActiveProducts XE06 Скачать руководство пользователя страница 8

13

14

CAUTION

Drain gun assembly of any remaining water. Aim gun downwards and squeeze trigger.

WINTERIZING AND LONG-TERM STORAGE

OPTIMUM WINTERIZING PROCEDURE

Winterizing your pressure washer will help protect and prolong its life. We strongly 
recommend you follow the below steps using Pressure Washer Pump Saver (39-8602-0). 
This will keep the internal parts lubricated, protected from rust, and prevents the pump 
from freezing.

Connect Pressure Washer Pump Saver hose onto the adaptor and quick-connect 
coupling.

Depress button on top of Pump Saver container.

Continue until fluid exits the pressure hose.

Remove the hose from pump inlet.

QUICK WINTERIZING PROCEDURE

If you cannot do the Optimum Winterizing procedure, you can still protect your pressure 
washer from winter-damage by doing below:

Disconnect all water connections.

Turn on the machine for a few seconds, 
until the remaining water in the pump 
exits. Turn off immediately.

Do not allow high-pressure hose to 
become kinked.

Store the machine and accessories in 
a room that does not reach freezing 
temperatures. Do not store near 
furnace or other sources of heat as it 
may dry out the pump seals.

Recommended: Pressure Washer Pump 
Saver (39-8602-0)

CLEANING AND MAINTENANCE

Connections

Connections on pressure washer hoses; gun and spray wand should be cleaned regularly 
and lubricated with non-water soluble grease.

Spray Tips Only

Clogging of the spray tips causes the pump 
pressure to be too high and cleaning is 
immediately required. You can clean the 
spray tips by carefully inserting the needle, 
or a thin, sharp instrument (i.e. paperclip) 
into the tip to rid it of deposits.

Water Filter Screen

The pressure washer is equipped with a 
water inlet screen to protect the pump. 
If the screen is not kept clean, the flow 
of water to the pressure washer will be 
restricted and the pump may be damaged.

1. To clean inner water screen, remove 

quick-connector and remove the filter 
screen from the pump inlet.

2. Rinse screen until it is free of debris  

and blockage.

3. Replace screen and quick-connector 

immediately to prevent any foreign 
matter from entering the pump.

2

2

1

1

3

3

4

4

Содержание XE06











Отзывы: