Harrier series camera
.
September 2022
www.activesilicon.com
Page 29 of 52
PTZ Setting
Figure 39. PTZ setting
"Protocol": Click on the drop-down menu to pop up a variety of protocols to choose according
to needs, and will continue to update.
“Address”: Set as needed (0-255).
"Baud Rate": Click on the drop-down menu to pop up a variety of parameters to choose
according to needs, baud rate "2400" - "115200" multiple options.
"Data bits": Click on the drop-down menu to pop up a variety of parameters to choose
according to needs, and choose "5", "6", "7", "8".
“Stop Bit”: Click on the drop-down menu "1" and "2" to choose.
"Parity": Click on the drop-down menu "None", "Odd Check" and "Even Check" to select
according to needs.
"Save": After setting up, click Save, it will pop up and save successfully.
Refresh: Click to refresh the display.
Image capture setting
Figure 40. Image capture setting
Channel Enables: Enables are selected and set according to requirements.
