1.1 Reg. card
Select this item, then press “#” button to enter into the following interface:
Register card
#OK
*Cancel
Room No.-[ ]
Press room No. firstly, then get the access card closed to swiping card area, the
system will display “ Success”, now this card registration is successful.
1.2 Unlock
Select this item, then press “#” button to enter into the following interface:
Unlock Timeout
#OK
*Cancel
Value-[ ]
Param-[ 1-9 ]
Press any digit from 1
～
9.
For example, if press 8, it indicates that the setting unlocking time is 8 seconds.
When the user unlock the door, it will be auto-closed after 8 seconds.
Press “#” button to confirm after setting, the system will display “ Success”, now
the setting is successful.
1.3 Delay
Delay Unlock
#OK
*Cancel
Value-[ ]
Param-[ 0-9 ]
Select this item, then press “#” button to enter into the following interface:
Press any digit from 0
～
9.
For example, if press 5, it indicates that the setting delay unlocking time is 5
seconds. When the user press “Unlock” button on the indoor monitor, the door will be
open after 5 seconds.
Press “#” button to confirm after setting, the system will display “ Success”, now
the setting is successful.
-5-
Commercial in Confidence
WWW.ACTIVEONLINE.COM.AU
+61 (0)7 5551 0306
