background image

 

BEFORE FIRST TIME USE SET YOUR TIME ZONE! (see pg.6, USA 
Time Zone Setting, for instructions on how to set)

 

 

RESET BUTTON:  If after installing 2 new ”C” batteries the clock does 
not function, press the RESET button on back of the clock and wait for 
the clock to reset itself. 

 

NOTE: 

Please wait whenever the clock hands are automatically spinning.  The clock is 

setting the correct time.  Your clock will resume running with the correct time 
automatically when the hands stop spinning fast.  You will not be able to use any other 
function while the watch is setting itself. 
 

Button Functions: 

NOTE:  The second hand must be running normally before you can initiate any button 
functions.  Push S1 to confirm after changing any settings. 

 

Time Talking (S1)

 

Push S1 once to hear the Time (Hour, Minute, AM/PM) 
 

Day Talking (S1) 

Push S1 twice to hear Day, Month, Date and Year 

 

Reception Status Check (S1)

 

1.

 

Push S1 3 times to hear the reception status of the clock 

2.

 

If signal reception was successful, the clock will speak “Country name” follow by 
“Time Updated”.  Example “USA, Time Updated”. 

3.

 

If signal reception failed, the watch will speak ”Country name” follow by “ Time Not 
Updated” for example “USA, Time not updated”. 
 

Alarm Time Talking (S2)

 

Check Alarm Time Setting

:  

Press S2 once to check the Alarm Time Setting and Alarm Status (On/Off.)  
 

Turn Alarm ON/OFF:   

Press and Hold S3 for more than 3 seconds until you hear if the alarm is set to ON or 
OFF by listening for “Alarm ON” or “Alarm OFF.”   
 
Note:  After checking the alarm time setting with S2, you should wait 1 minute if you 
want to hear the alarm time setting again or press S1 on top of clock to Confirm and then 
you can press S2 to hear alarm time setting again.   If you press S2 before this you will be 
in the alarm time setting mode where you advance the alarm time hour. 

 

USA Time Zone Setting (S7)

 

1.

 

Open the battery cover to reach the Time Zone Setting button (S7). 

Содержание NMQ









Отзывы: