Activate Corgi Power Hi-Lo, Руководство пользователя

Страница: 10 / 22

9
OPERATING INSTRUCTIONS
The Remote or Joystick controller.
In this picture you will see the ON/OFF
switch in the centre of the controller near the
battery indicator lights. The eight coloured
lights indicate the level of charge left in the
batteries. With all lights showing with full
charge, and red lights being a low charge
warning. The Horn is at the centre of the
remote joystick denoted by the bugle
symbol.
The Tilt Function button is located below the
On/Off switch. To enter the Seat Function
press this button. The number ‘1’ on the left
hand side will show when you are using the
seat raise function, and the number 2 will show
that you are in Tilt Mode.
The joystick is used to control the seat actuators. To raise the seat in Mode 1, the joystick
should be pulled backwards. It should be pushed forwards to go down again.
To tilt the seat back in Mode 2 the joystick should be pulled backwards and then pushed
forwards to tilt to the upright position.