The Infrared Wireless Expert
ACT-IR4002US
User’s Manual
© Copyright 2002-2010 ACTiSYS Corp.
Page 5 of 30
Apr 21, 2010
V.1.0.0
ACTiSYS Confidential Information
1 INTRODUCTION
ACT-IR4002US is an advanced wireless Fast Infrared USB adapter designed to replace the serial port or
FIR controller based FIR/SIR wireless peripheral through the USB port. Taking advantage of the true
plug-and-play nature and high bandwidth of USB, ACT-IR4002US offers the easiest conversion of
existing wireless to the legacy-free PC platform with the following features:
z
Supports Win 98SE/ME/XP (32 & 64 bit)/ Vista (32 & 64 bit)/Windows 7(32 & 64 bit), Win CE 4.2 &
5.0 (USB host), Mac 10.x (both Intel & Power PC based) and Linux.
z
WHQL
certified.
z
Fully compliant to USB specification 1.1 and IrDA specification 1.4
z
Full-speed (12 Mbps) USB device operation
z
Supports FIR (4Mbps), MIR (1.152 Mbps) and all SIR speeds (9.6, 19.2, 38.4, 57.6 and 115.2 kbps).
z
Bus-powered device. Obtain power from USB port. No external power supply required.
z
Low power consumption in standby mode (Standby current 20 mA).
z
Not occupy PC's COM or Parallel port and has no complicated hardware port and resource setting
and conflict, such as IO address / IRQ / DMA numbers.
z
Package size: 1.85"L x 0.7"W x 0.35"H, 2.08 oz (60 gr).
2 PACKAGING CHECK LIST
The package includes:
1. ACT-IR4002US USB Dongle
2. USB
Cable
3.
Installation CD for Driver and User’s manual.
3 SYSTEM REQUIREMENTS
1. Windows
98SE/ME/2000/XP/Vista/
Windows 7
, Win CE 4.2 & 5.0 (USB host), Mac 10.x (both Intel &
Power PC based) and Linux
2. One unoccupied USB port.
4 BIOS SETUP
Before you use this device, You MUST enable your computer USB port in BIOS Settings.
