The Wireless Connectivity Expert
ACT-IRx24UN-Lx /
ACT-IRx24UN-Lx-LE
User’s Manual
Copyright
2005-2014 ACTiSYS Corp
Page 8 of 28
Mar. 24, 2014
Version 1.3.4
Confidential Information
7.2 General Notes – Windows vs. Chip Inside
Windows 8 User, New Chip Inside:
Please skip
below CD installation steps.
Just plug the dongle and OS will auto find the hardware for
you.
Just in case
not succesful,
please run
the latest version of
Driver Installer, v1.7.0.
Windows 8 User,
Old
Chip Inside:
Please
Disable “Auto Update”
option on your
Windows Update. DO NOT
let
system go updating
to
its
native driver
for you
from
Windows Update!
Because
the
native driver of Windows
8
does
Not
support Old Chip!
Do also
Not
run Driver Installer v1.7.0
, because it
does Not Support Old
Chip,
either!
Please
run Driver Installer v1.5.0.
instead.
Windows Vista / 7, either New Chip or Old Chip Inside:
Please follow
Windows XP and under, either New Chip or Old Chip inside:
Please directly
run Driver Installer v1.7.0
,
from installation CD.
7.3 CD Installation Steps
1.
Insert the installation CD. In most cases this should start the installation automatically.
And the first step it will copy the following files to the path:
“C:\Program Files\ACTiSYS\ACT-IRx24UN\”
o
ACT-IRx24UN-Lx
/
ACT-IRx24UN-Lx-LE
Quick Guide & User’s Manual.
o
ACT-IRx24UN-Lx
/
ACT-IRx24UN-Lx-LE
DriverInstaller is copied to the subdirectory named
“Driver”.
2.
If the installation Does start automatically, go to the next section: Driver Installation.
3.
Else, explore the CD.
4.
Double click “
Autorun.bat
”, or “Autorun.exe” for Windows.
7.4 Driver Installation
7.4.1 Driver Installation – Windows 8 (32 & 64 bit)
Please refer to section
7.1 Definition of New Chip Inside
. Check your chip inside first.
If your chip inside is New, follow above section
Else, follow above section
