ACTISOL B390100, Руководство по эксплуатации

Страница: 10 / 31

PUMP
The Actisol
®
Perimeter Pro is equipped with a ShuRflo 8000 series
industrial pump. The information outlined by this manual is
general and not specific to all 8000 series pumps.
Caution: “Intermittent Duty” is defined as; operated and/or
frequently started within a period of time that would cause the
motor to reach its maximum thermal limits. Once the maximum
thermal limit is obtained, the motor must be allowed to return to
ambient temperature before resuming operation.
Caution: DO NOT use to pump flammable liquids. Never operate
the pump in an explosive environment. Arcing from the motor
brushes, switch or excessive heat from an improperly cycled motor
may cause an explosion.
Caution: DO NOT assume fluid compatibility. If the fluid is
improperly matched to the pumps’ elastomers, a leak may occur.
Pumps used to transfer hazardous or hot (max temperature 170°F
[76°C] Viton™ only) chemicals must be in a vented area to guard
against the possibility of injury due to harmful or explosive
liquid/vapors.
Caution: DO NOT operate the pump at pressures which cause the
motor to exceed the amperes rating indicated on the name plate.
Various pump models are equipped with thermal breakers to
interrupt operation due to excessive heat. Once the temperature of
the motor is within proper limits is will automatically reset, and the
pump
will start operation without warning.
Caution:
To prevent electrical shock, disconnect power before
initiating any work. In the case of pump failure, the motor housing
and/or the pumped fluid may carry high voltage to components
normally considered safe.
Page 7