Actisense PRO-MUX-2, Руководство по настройке, Страница: 10 / 11

PRO-MUX-2 CONFIGURATION GUIDE
PAGE 10
SERIAL SETTINGS
The serial settings are where the baud rate is individually configurable
for each input port and output port, and a ‘friendly name’ can be given to
each port. There are two routes that can be taken here for talker devices
connected to the inputs:
1. The device is left on the autobaud configuration, meaning that the
PRO-MUX-2 will adjust the baud rate on each input port dependant on the
baud rate of the talker device connected to it. (Autobaud is only available
on Ports 1-4. 5-8 are fixed to 4800 baud).
2. The device can be configured for each port manually, giving the
user more control over the configuration if the autobaud feature is not
preferred.
After configuring the Input ports, the Output ports can be configured. The
Output ports can be set up to either follow the baud rate on the chosen
Input or set to a manually selected value.
It is important to highlight that only Output 1 can be set to 115200 baud,
whilst the rest of the ports have a maximum baud rate of 38400.
Warning: Manually setting the output baud rate slower than the input baud rate may result in
the loss of data due to limited bandwidth. Consult the Stats page to view the output loading.