ActionTec T1200H Скачать руководство пользователя страница 85

Страница: 85 / 89

Notices

Declaration of conformity for products marked with the FCC logo – United States

only.

This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-

lowing two conditions:

. This device may not cause harmful interference;

This device must accept any interference received, including interference that

may cause unwanted operation.

Note: To comply with FCC RF exposure compliance require-

ments, the antenna used for this transmitter must be installed to

provide a separation distance of at least 20 cm from all persons

and must not be co-located or operating in conjunction with

any other antenna or transmitter.

For questions regarding your product or the FCC declaration, contact:

Actiontec Electronics, Inc.

760 North Mary Ave.

Sunnyvale, CA 94086

United States

Tel: (408) 752-7700

Fax: (408) 541-9005

GPL (General Public License)

This product includes software code developed by third parties, including software

code subject to the enclosed GNU General Public License (GPL) or GNU Lesser

General Public License (LGPL). The GPL Code and LGPL Code used in this prod-

uct are distributed WITHOUT ANY WARRANTY and are subject to the copy-

rights of the authors, and to the terms of the applicable licenses included in the

download. For details, see the GPL Code and LGPL Code for this product and the

terms of the GPL and the LGPL, which are available on the Telus web site.

Содержание T1200H


























































































Результаты поиска

Содержание T1200H

Отзывы:

Похожие инструкции для T1200H

Бренды по названию

Популярные бренды

ActionTec T1200H, Руководство пользователя

Результаты поиска

Содержание T1200H

Отзывы:

Похожие инструкции для T1200H

Бренды по названию

Популярные бренды