Welcome!
Step
2
Plug one end of the power
cord into the power port on the
back of the Receiver.
Plug the other end into a nearby
electrical outlet.
Step
3
Plug one end of the HDMI
cable into the HDMI port on the
back of the Receiver.
Plug the other end into an HDMI
port on your HDTV.
Make sure your HDTV is set to the
same HDMI port to which you
connected the Receiver.
NEXT
Flip this Guide over to continue
A
Install the Receiver
Congratulations on your purchase of a ScreenBeam Wireless
Display adapter kit. The ScreenBeam kit lets you wirelessly
display your Windows 7 or 8 laptop or WiDi/Miracast device
on your HDTV.
B
Install the Software and Transmitter
Step
2
When you see the screen
shown on the right, make sure
you’ve completed the steps in
section A of this Guide.
Then, continue to follow the
onscreen instructions.
Step
4
Insert the ScreenBeam
Transmitter into a USB port on
your computer, then click Next.
Step
1
Get the ScreenBeam
Receiver, power cord, and HDMI
cable from the ScreenBeam box.
Step
1
Insert the ScreenBeam CD
into the CD drive of a computer.
An AutoPlay window appears on
the computer’s screen.
Click Run setup.exe, then follow
the onscreen instructions.
Note: If you don’t see the AutoPlay
screen, locate your CD-ROM folder
from Windows Explorer and then double-click on setup.exe.
If your computer does not have a CD/DVD drive, go to
www.actiontec.com/screenbeam to download the
ScreenBeam software.
Important Note: If you’re connecting to a device that has
built-in Miracast™ or Intel’s WiDi™ (3.5 or higher), you’ll only need
to complete section A of this Quick Start Guide. After
completing the steps in section A, go to the end of this Guide for
additional information about Miracast and Intel WiDi devices.
Step
3
When you see the screen
shown on the right, get the
ScreenBeam Transmitter from the
ScreenBeam box.
Note: If the Transmitter was already
connected to the computer prior to
step 4, unplug it, then plug it back in.
Step
5
Click on the button next to
“Yes, I want to restart my computer
now,” then click Finish.
Your computer reboots.
