ActionTec R1524SU Скачать руководство пользователя страница 80

Страница: 80 / 147

Chapter 7

Using Utilities

Upgrade Firmware

Selecting

Upgrade Firmware

in the “Utilities” screen generates the “Upgrade

Firmware” screen.

Action

tec periodically posts firmware upgrades to enhance the

Gateway’s capabilities.

Windows Computer

If the Gateway is connected to a computer running Windows OS:

Click

Upgrade Here

in the Upgrade Firmware screen and download the

upgrade files to the hard drive of the computer.

Double-click on the upgrade file (upgrade.exe).

Click

Start

. The upgrade process begins.

Warning

: Do not unplug the power cord from the Gateway

during the Upgrade Firmware process. Doing so may result in
permanent damage to the Gateway.

After the upgrade is complete, unplug the power cord from the Gateway, then
plug it back in again.

When the Power Light stops flashing and glows steadily green, the Gateway is
fully operational.

Reconfigure the Gateway settings.

Non-Windows Computer

If the Gateway is connected to a computer running an operating system other than
Windows:

Click

here (

at the end of the phrase “…please click here”) in the Upgrade

Firmware window.

Содержание R1524SU




















































































































































Результаты поиска

Содержание R1524SU

Отзывы:

ActionTec R1524SU, Руководство пользователя, Страница: 80 / 147

Результаты поиска

Содержание R1524SU

Отзывы: