14
4
Using Advanced Setup
This section contains information concerning setting up the advanced features of the Gateway, such as
wireless settings, remote management, and Web site blocking, using the Gateway’s Web Configurator.
Accessing Advanced Setup
To access the Web Configurator’s Advanced Setup screens:
1.
Open a Web browser. In the “Address” text box type:
http://192.168.0.1
then press
Enter
on the
keyboard.
2.
The “Main Menu” screen appears. Select
Setup/Configuration
.
3.
In the “Set Up/Configuration” screen, read the instructions, then select
Advanced Setup
from the menu
on the left side.
Actiontec 54 Mbps Wireless DSL Gateway User Manual
3
4.
In the next screen, read the recommendations. To perform an advanced setup on the Gateway, click
Begin Advanced Setup
.
5.
The “Configuring the Advanced Settings” screen appears. To check all the settings, or if unsure of which
settings to modify, select
Next
. To modify a specific configuration, click on its name in the menu bar
on the left.
?
Note
: To save changes made in any of the Advanced Setup screens, click
Save and
Restart
at the bottom of the gray menu on the left side of the screen.
WAN IP Address
Selecting
WAN IP
Address
in the “Configuring the Advanced Settings” screen generates the “
WAN IP
Address” screen.
WAN IP
Address allows manual set up of the IP address of the Gateway. There are five
ways to do this:
Transparent Bridging, Obtain an
IP
Address through
PPP
o
E
,
Obtain an
IP
Address
Through
PPPoA
,
Obtain an IP Address through
DHCP
, and
Specify a Static
IP
Address
.
?
Note
: If unsure about which connection is present, check with the Internet Service
Provider (
ISP)
before continuing.
39 Chapter 4 Using Advanced Setup
After selecting a connection type, click
Next
to continue configuring the connection.
