1
Connect the Gateway to a Computer
Note: If you are a Macintosh® User, or other non-
Windows User, please use this Quick Start Guide.
This Quick Start Guide will walk you through the
easy steps to set up your Wireless DSL Gateway.
During this process, we’ll show you how to:
• Wireless DSL
Gateway
• Black Power
Cord
• Black or Gray
DSL Cable
• Yellow Cable
• Clear Bag
NEXT
Quick Start Guide
Wireless DSL Gateway with Voice
Model# GT704WGRV
You will need the following items from
your
Action
tec Quick Start Kit:
2
Install the Phone Filters
3
Configure the Gateway
4
Turn the Wireless Signal ON
Step 1
Open a Web browser
(Netscape Navigator or Internet
Explorer, for example). In the
address bar, enter
http://192.168.0.1
, then press
Enter
on the keyboard.
Step 2
The “Main Menu” screen
appears. Select
Setup/ Configuration
.
3
Configure the Gateway
4
Turn the Wireless Signal ON
Step 3
Follow the instructions in
the “Set Up/Configuration”screen,
then click
Begin Basic Setup
.
Step 7
Click
Save and Restart
in the “Save and Restart”screen.
Step 9
Go to the “Main Menu”
screen. Select
Utilities
.
Step 8
The “Congratulations”
screen appears. The Power
Light flashes rapidly while the
Gateway restarts, then glows
SOLID green when fully
operational. The DSL Light will
also glow SOLID green. Please
go to Section 4 to complete
the setup of this Gateway.
If your DSL Light flashes, please
go to
Step 9.
Step 12
Click
Save and
Restart
in the “Save and
Restart”screen.
Step 13
The “Congratulations”
screen appears. The Power Light
flashes rapidly while the Gateway
restarts, then glows SOLID green
when fully operational.The DSL
Light will also glow steadily green. Now go to Section 4.
Step 4
In the next window,
follow the onscreen instructions,
then click
Next
.
Step 5
In the next window, select
the type of connection by clicking
on the circle next to
PPPoA
or
PPPoE
. If unsure about the selection,
contact your ISP. Then click
Next
.
Step 6
Enter the
User Name
and Password
provided by
the ISP in the ‘DSL Broadband
Connection - PPP’ screen.
Click
Next
.
Step 10
Click on
DSL
Settings
.
Step 11
Input VPI/VCI settings
as provided by your ISP. Click
Save and Restart
. This will
take you to the “Save and
Restart”screen.
If an error stating the Web browser was unable to connect to
the Internet appears, check the configuration settings. Ensure
all the information required by the ISP is entered correctly.
Your Wireless DSL Gateway has the capability to transmit a
wireless signal throughout your home. To turn the Wireless
Signal ON, follow the instructions for steps 1-5 below.
Note
: If this screen does not appear, make sure your Ethernet port is configured
for Dynamic IP.
Congratulations!
You have successfully installed your Wireless
DSL Gateway. You can now access the Internet at high speed.
Part No: 0530-0466-000
QS663/1203
Step 3
Click
Begin Advanced
Setup
.
Step 4
Select
Wireless Settings
from the menu on the left.
Step 1
Go back to the “Main
Menu” screen. Select
Setup/
Configuration
.
Step 2
Select
Advanced Setup
from the menu on the left.
Step 5
Make sure the circle next
to
ON
is selected.
Then click
Save and Restart
from the menu on the left.
