User Manual of Wireless LAN 802.11a/g Dual Band PCI Adapter
5
ACU Installation and Driver Update
There is an InstallShield utility to upgrade the NDIS driver, if a previous release is
installed, and to install the Atheros Client Utility (ACU).
When an NDIS driver has been previously installed, insert the 802PAG into a PCI Bus.
Follow these steps to update the NDIS driver:
1. Open the InstallShield Wizard (setup.exe).
2. Click Next to continue.
3. Click ‘Yes’ to accept the License Agreement.
4. The Setup Type page provides selections as summarized in Table 1.
Choose the selection appropriate for your network.
Table 1.
Setup Type Page Selections
Selection Description
Install Driver and ACU
Recommended. Updates driver and
installs the ACU.
Install Driver Only
Installs NDIS driver only
Install ACU Only
Installs ACU only.
Make Driver Installation Diskettes
Creates ACU installation diskettes.
5. Click Next to continue.
6. Choose the destination location. Click Next to continue.
7. Specify the program folder to store start icons.
8. Use the checkbox to enable the ACU tray icon and start the ACU when restarting
the system. The tray icon will appear in the Windows System Tray.
9. If a previous release of the ACU is installed, make sure it isnot currently running.
Click Next to continue
If you are running a previous version of the ACU, a dialog box will appear
requesting an exit from the program. Click OK and continue.
10. The Atheros NDIS evaluation driver currently does not have a digital signature
from Microsoft, so Windows 2000 may show a warning message. Click Yes to
proceed with driver installation.
11. Click Finish when the InstallShield Wizard is complete.
