ActionTec 802CIG, Руководство пользователя

Страница: 44 / 53

45
Troubleshooting
In the unlikely event you encounter a problem using
your
Action tec 54 Mbps Wireless PC Card, refer to the troubleshooting
procedures in this chapter to resolve your problem.
1. My computer does not recognize my 54 Mbps Wireless PC Card.
Be sure the 54 Mbps Wireless PC Card is properly inserted into a 32-
bit CardBus slot. If Windows does not detect the hardware when you
insert the Card, your computer could have a driver for a previous PC
Card installed. Remove the old driver and try again.
2. My 54 Mbps Wireless PC Card does not work properly after the con-
figuration utility is installed.
Reinsert the 54 Mbps Wireless PC Card into the slot. Go to Device
Manager and verify that your 54 Mbps Wireless PC Card appears as a
network node. If you see a yellow exclamation point, there are conflict-
ing resources. In this case, be sure your computer has a free IRQ and
be sure you have installed the configuration utility for your 54 Mbps
Wireless PC Card. If necessary, uninstall your 54 Mbps Wireless PC
Card (see Chapter 8) and then reinstall it,
3. Stations cannot associate in AdHoc mode.
In the Network Name field of the configuration utility’s Configuration
tab, be sure the same SSID is specified for all stations that need to
join the same AdHoc network (see Chapter 3).
4. The station cannot access the Internet in Infrastructure mode.
Be sure the station is associated with and joined an Access Point. If
WEP security is enabled in the configuration utility’s
Encryption tab,
the station must have the proper WEP keys specified. Also, be sure
TCP/IP properties are configured appropriately.
6