ActionTec 56K/V.92 Скачать руководство пользователя

Страница: 39 / 43

Action

tec External 56K/V92 Modem User Manual

Modifications

The

FCC

requires the user to be notified that any changes or modifications made

to this device that are not expressly approved by A

ction

tec Electronics, Inc., may

void the user’s authority to operate the equipment.

Declaration of conformity for products marked with the

FCC

logo – United States

only.

This device complies with Part 15 of the

FCC

Rules. Operation is subject to the fol-

lowing two conditions:

This device may not cause harmful interference;

This device must accept any interference received, including interference that
may cause undesired operation.

☞

Note

: To comply with

FCC RF

exposure compliance require-

ments, the antenna used for this transmitter must be installed to
provide a separation distance of at least

cm from all persons

and must not be co-located or operating in conjunction with
any other antenna or transmitter.

For questions regarding your product or the

FCC

declaration, contact:

Action

tec Electronics, Inc.

760

N. Mary Ave.

Sunnyvale,

CA 94086

United States

Tel:

408.752.7700

Fax:

408.541.9005

Содержание 56K/V.92












































Результаты поиска

Содержание 56K/V.92

Отзывы:

Похожие инструкции для 56K/V.92

Бренды по названию

Популярные бренды

ActionTec 56K/V.92, Руководство пользователя

Результаты поиска

Содержание 56K/V.92

Отзывы:

Похожие инструкции для 56K/V.92

Бренды по названию

Популярные бренды