11
S002023 Action 2 Unit Swing Set
Assembly Instructions (cont)
STEP 6
Place the 4 x Ground Pegs (47) through the holes at the base of the Lower Legs (5) and secure them into
place by fixing them into the ground.
Warning:
For safety reasons this swing set MUST be anchored into the ground. To carry out this
procedure you must hammer the included ground pegs into the ground at the angle shown in the
picture above. The ground pegs must pull into hard earth and hold firmly. We highly recommend
that the ground pegs be concreted but this is optional. However, if the ground is soft and the ground
pegs can easily be pulled out by hand once installed then concreting is essential. Contact our Service
Centre for more information if you are ensure regarding the installation of the ground pegs.
Soil
30mm
5
5
47
47