Action Sports Equipment S000665, Сборка, установка, уход, обслуживание и инструкции по использованию

Страница: 14 / 25

SECTION 1- MAIN FRAME ASSEMBLY
Note:
At least two people are required for the assembly of the swing set.
Caution: The swing set should be placed on a soft surface, such as a grassed lawn area is
recommended.
1.1 Lay out the top frame on a soft and level surface as Fig. 1. Align holes, connect the Top Support Tubes
(MF-1a,b,c) and the Top Support Tube Braces (MF-2), using Bolts, Washers & Nuts of A2 & A3. See Fig.2
Figure 1
Figure 2
1.2 Slide the Lower Leg Tubes (MF-5 & MF-6) into the Upper Leg Tubes (MF-4), align holes. Make sure the
Lower Leg Tube (MF-6) is placed at the right front side. Attach the connector (SS-01) to the right front leg
tube (MF-6). See Fig.3
Figure 3
©
ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 14