Step 1 Seat and Handle Bar Assembly Instructions
1.-1
Firstly secure the plastic seat (N) onto each of the main side bars (K) using 25mm screw
bolt (E), washer (F & G) and nut (P) (See Fig. : 1)
1.- 2
Fix the handle bars (M) onto the main side bar (K). Using 50mm screw bolts (D), washer
(F & G) and nut (P). (See Fig. : 2)
Step 2 Main Bar Assembly Instructions
Notice:
Once assembled you can modify the length of each end of the see-saw by
choosing which screw holes to use.
This is useful if the play item will be used by children of different ages or sizes.
2. -3
Slide the main side bar (K) into the main center bar (H). (See Fig. : 3)
Insert small plastic tube (V) between K & H
2. -4
Warning! To avoid finger entrapment, These bolts must be tightened as shown.
(See Fig. : 4)
Page 4 of 5
Assembly Steps:
