actidata Storage Systems GmbH
–
D-44149 Dortmund
–
Wulfshofstr. 16
Table of Contents
1.
Introduction
2.
Overview: Components & Connections
3.
Getting started
4.
Access to BIOS and IPMI
5.
Monitoring / Disable Alarm
6.
Further Information
1. Introduction
Before starting any installation or additional configuration, please note:
1.
Before unpacking, check boxes and systems on damages as well as double checking the
contents. If any damage is recognized inform your supplier immediately to protect
your rights of warranty.
2.
Before starting, please check the scope of delivery:
a.
1x actidata System with the correct hardware content
b.
1x power cord
c.
Documentation and Software-driver on USB-Stick, Service-Certificate and Quick
Start Guide
d.
Optional HDDs / SSDs or/and LTO media
3.
Only experienced experts should install and operate the system.
4.
Use the system only in supported IT-environments.
5.
Before starting check all connections, also Power Connection and correct power values.
6.
All warranty disclaims in case of wrong mounting, wrong connecting, wrong operation,
or any use where the system is not built for.
7.
Please take care of backups. actidata Storage Systems GmbH assumes no liability for
data loss.
Service-Registration:
Each system is supplied with a service certificate. We recommend to register the service online:
Contact to Our Technical Support
T: +49 (0) 2 31/96 36 32
–
35 (Technical Support)
I: www.actidata.com
