actiLib Library 4U – Quick Start Guide
Page 18 of 21
6 Connecting the Library
6.1
Connecting the SCSI and power cable
INFORMATION
The LTO4 tape drive is an Ultra 320 SCSI LVD device.
Only cables and terminators specified for Ultra 320 uses
or labeled as Multi Mode should be used.
WARNING
Use approves power cords!
Not doing so can result in the following:
not meeting individual country specific safety
requirements;
insufficient conductor amp city that could result
in overheating with potential personal injury
and/or property damage;
an unapproved power cord could fracture
resulting in the internal contacts being exposed,
which potentially could subject the user to a
shock hazard.
Manufacturer disclaims all liability in the event a
non-manufacturer approved power cord is used.
CAUTION
Failure to remove the power cables from these devices
could result in damage to the Library.
To connect the SCSI and power cable to the tape Library:
1.
Shut down and turn off the selected server. Turn off all attached devices, such as printers and
other SCSI devices. Remove the power cables from the server and all attached accessories.
2.
Attach one end of the SCSI cable (included in the accessory package) to one of the connectors on
the back panel of the Library (see
Figure 2
)
