www.acti.com
User
’s Manual
24
7. Tap the
Schedule Template
field to enter the Schedule Template page. Select a
s
chedule template and tap √ to save the settings.
NOTE:
After applying the schedule template from the client software to the device, you
can select the corresponding schedule template.
8. Tap
Authentication Mode
to enter the Authentication Mode page. Select
Device
or
Custom
as the authentication mode.
Device:
If you want to seelct device mode, you should set the terminal authentication
mode in Acess Control Settings page first. For details see
6.5 Setting Access Control
Parameters
. The user will authenticate his identity according to the configured
authenticaion mode. By default, the authentication mode
Device
. This mode is
applicable to edit users’ authenticaiton modes in batch.
Custom:
If an user needs to use a special authentication mode, which is different from
the authentication mode configured in
6.5 Setting Access Control Parameters,
he can
use other authentication modes. The user will authentication his identity according to the
customized authentication mode first. This mode is applicable to edit single user’s
authentication mode, which has special permissions.
9. Enable or disable the
Duress Card
function.
When the function is enabled, the
user’s card will be the duress card. When the user
authenticates by swiping this duress card, the device will upload a duress card event to
the client software.
10. Tap
√
to save the user parameters and go back to the Home page.
