www.acti.com
Hardware Manual
11
Installation Procedures
This section describes procedures in mounting the camera on the ceiling.
NOTE:
There is a plastic film protecting the lens. Do not remove the plastic film until the
installation is complete. However, the plastic film has been removed on the camera
images in this documentation to capture them more clearly.
The camera images on this documentation are for reference only and may be
different from the actual camera.
Step 1: Prepare for Installation
Before installation, refer to the People Counting Camera Selector for tips and other information
which may be useful for your application.
Depending on the material of the surface where the camera will be installed, it may be necessary
to drill the three (3) screw holes and use the supplied screw plugs. In this case, attach the
bundled drill template on the surface and drill the screw holes.
Note that t
he camera logo indicates the upright camera orientation. For ease of configuration, it is
recommended that camera is installed with the logo facing the people passing by.
