www.acti.com
Hardware Manual
21
9.
Attach the clamping nut to the cable gland body. Make sure the clamping nut is tightly
secured and the rubber is squeezed in to avoid water leakage.
10.
Arrange all unused cables and wrap them with the waterproof tape.
NOTE:
Different applications and installation environments require different types of
waterproofing methods which may not be covered in this manual. Check your
installation environment and adapt a suitable waterproofing method.
If the camera is installed outdoors and the bundled power adaptor is used, be sure to
protect it from different environmental factors. It is recommended to place the power
adaptor indoors or housed it inside a junction box (see
How to Use the Junction
Box
on page 26).
DISCLAIMER:
ACTi will not be responsible for camera damage caused by improper use
of the power adaptor.
