Standalone NVR Quick Installation Guide
5
CONNECT THE DEVICES
The example below displays a network consisting of only INR, network
cameras and required peripherals. Please remember to enable the DHCP
service on your router for INR to obtain an IP address automatically.
Note
To assign a static IP address to INR, enter
Windows and configure the network
settings in
Network and Sharing Center
.
Power Source
USB Devices
VGA Monitor
Switch
Cameras
Note
Please make sure
both power cords are
fully inserted.
ATTACH THE FRONT COVER
After finishing installing the disks, attach the front cover to its front panel.
Step 1
Hook the left end of the cover onto
the chassis’ left ear.
Step 2
Fit the free end of the cover onto the
unit.
