Standalone NVR Quick Installation Guide
5
START-UP
CREATE HARDWARE RAID
1. On the unit’s rear panel, press down the Power Switch
to the side with “
l
” mark.
2. On the unit’s front panel, press down Power Button to turn on the unit.
3. As this unit starts up, you will enter Windows logon screen. Input the
password “
123456
“ to log in as administrator.
Note
Before removing or insert-
ing the hard disk trays,
please make sure the unit is
turned off.
Moving the trays while the
unit is operating can cause
damage to the disk.
As this unit supports hardware RAID configuration, you can make disk arrays
using the bundled software utility.
1. On Windows Desktop, double-click on the shortcut to initialize the
RAID management utility.
2. On
Basic RAID Configuration
tab, select a RAID type and click on “
Apply
“.
3. After the configuration is complete, the RAID information will appear.
