www.acti.com
Hardware Manual
15
Other Adjustments and Accessories
This section describes the procedures in preparing the camera for corridor viewing angle,
installing a memory card, resetting the camera, and attaching Ethernet cable connectors.
How to Position Camera for Corridor View Format
The camera supports the following viewing format:
Horizontal: The camera has a wider viewing angle horizontally.
Corridor: The camera has wider viewing angle vertically.
The camera is set to horizontal viewing angle, by default. To change between Horizontal and
Corridor format:
1.
Access the
Web Configurator
(see
Accessing the Camera
on page 24 on how to access
the camera), then rotate the camera view to 90° or 270° to achieve corridor format. See
the camera Firmware Manual for more information.
2.
Loosen the knob to adjust the camera orientation and attach the sunshield to its correct
position based on the camera orientation.
NOTE:
There are three (3) holes in which to attach the set screw, use any one of them
depending on the preferred viewing angle. The middle hole is used for horizontal view
format and the two (2) others are for corridor format.
