Hardware Manual
How to Connect a Power Adapter (for E217, E222 only)
In case of using a non-PoE switch or your PoE switch has limited power supply, you can
purchase a power adapter and directly connect the camera to a power outlet. The power adapter
must be connected to the supplied terminal block before use.
To do this, follow the procedures below:
1.
Loosen the screws of the
12V
and
GND
pins of the power terminal block.
2.
Take note that a standard power adapter cable has two (2) different wires:
3.
Connect the wire with the white stripe to the
12V
pin and the other to the
GND
pin.
NOTE:
The terminal block pictures are for reference only, note that actual label placement
may vary per model.
White stripe: Connects to 12V Pin
Connects to GND Pin
