www.acti.com
Hardware Manual
16
2.
Secure the bracket by threading the lock knot.
Step 3: Mount the Camera
1.
Attach the supplied drill template sticker on the surface.
2.
Determine how the cable will be routed:
pass through a hole on the surface
or
along the
surface
.
If the cables will pass through a hole on the surface
, drill the cable hole and the three
(3) screw holes on the surface.
If the cables will be routed along the surface
, just drill the three (3) screw holes.
3.
Detach the drill template sticker and insert the plastic plugs into the screw holes.
4.
If the cables will pass through a hole on the surface
, route the cables through the hole on
the wall.
If the cables will go along the wall
, route the cables through the gap on the bracket.
