Installation Guide
Step 4: Connect the Cable
1.
Connect the network cable to the Ethernet port of the camera.
If the cable passes through
the surface
, push the excess length of cable further into the hole.
2.
On the network side, connect the other end of the cable to a switch or injector. Then, connect
the switch or injector to a network or PC and a power source. See Power-over-Ethernet (PoE)
connection example below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
Step 5: Access the Camera Live View
How to Access the Camera Live View
on page 7 for more information on how to access
the Live View of the camera.
